Hi Guys,
I am experiencing a problem with a terrain and a stationary plane (which I intend to use as water later on.
The plane appears to pop-up and down when moving. I am guessing this is something to do with the LOD on the terrain.
http://youtu.be/GRf5DW87EBg
Any ideas on how I could fix this would be great
[edit]
Just tried setLodBias on the camera. No good.
Problem with terrain [Solved]
- lonewolff
- Ogre Magi
- Posts: 1207
- Joined: Wed Dec 28, 2005 12:58 am
- x 6
Problem with terrain [Solved]
Last edited by lonewolff on Wed Jul 30, 2014 4:30 am, edited 2 times in total.
- c6burns
- Beholder
- Posts: 1512
- Joined: Fri Feb 22, 2013 4:44 am
- Location: Deep behind enemy lines
- x 138
Re: Problem with terrain
Looks more like z-fighting to me. Raise your camera's near clip distance by a multiple of 10 or 100 to check (eg. if it's 0.1 then make it 1.f or even 10.f). Lowering the far clip can be helpful but most often it's an issue of blowing all your depth precision too near to the camera.
- lonewolff
- Ogre Magi
- Posts: 1207
- Joined: Wed Dec 28, 2005 12:58 am
- x 6
Re: Problem with terrain
Genious!
I had near clip 0.1 and far 1000.0
So I changed near to 1.0 and that fixed the problem.
Many many thanks!
You have just been Kudo'sed (as I cant send chocolates throughthe internet)
I had near clip 0.1 and far 1000.0
So I changed near to 1.0 and that fixed the problem.
Many many thanks!
You have just been Kudo'sed (as I cant send chocolates throughthe internet)